▎教学与科研情况 本科生教学： 1.先后讲授《理论力学》、《材料力学》、《工程力学》、《结构力学》、《力学基础知识综合强化训练》等本科生课程。 2.编写《理论力学》教材。 3.指导学生完成多项国家大学生创新计划项目，如：刮擦作用下缝合角膜的力学行为表征与成像效果评估、地铁e型弹条扣件的疲劳损伤演化与寿命预测研究、高速铁路无砟轨道水泥沥青砂浆的损伤演化研究、柔性支撑条件下大跨径钢箱梁桥面铺装体系的破坏行为研究等。 研究生教学： 讲授《损伤力学》课程，年均招收硕士生1-2名，博士生1-2名。 科研兴趣： （1）软物质力学；（2）材料与结构损伤力学；（3）桥梁施工监控与长期健康监测。 科研项目： （1）国家自然科学基金重点项目，长时使役下缝合人工角膜力-光性能的实验研究与功效分析（12432008），起止时间：2025.01-2029.12。 （2）国家自然科学基金面上项目，高速铁路无砟轨道水泥沥青砂浆的蠕变与脉冲疲劳耦合损伤与破坏研究（12072116），起止时间：2020.01-2024.12。 （3）国家自然科学基金面上项目，围压下环氧树脂基混凝土的动态压剪累积损伤与破坏行为研究（11772132），起止时间：2018.01-2021.12。 （4）国家自然科学基金面上项目，梯度泡沫填充混凝土的动态压剪实验方法与冲击破坏机理研究（11272124），起止时间：2013.01-2016.12。 （5）企事业单位委托项目，预制构件连接性能研究，起止时间：2024.07-2026.12。 （6）企事业单位委托项目，广汕路跨线桥路堑高边坡监测，起止时间：2024.11-2025.12。 （7）企事业单位委托项目，基于60Si2Mn材料紧固件制品疲劳损伤与可靠性研究，起止时间：2022.08-2023.08。 （8）企事业单位委托项目，钢管再生混凝土的SHPB动态力学性能实验，起止时间：2022.05-2022.09。 （9）企事业单位委托项目，长脉宽冲击波作用下典型桥梁破坏效应仿真及评估系统开发，起止时间：2020.10-2020.12。 （10）企事业单位委托项目，典型桥梁目标XX效应数值仿真，起止时间：2019.06-2019.12。 （11）企事业单位委托项目，中央墩盖梁支架计算分析及监控监测技术服务，起止时间：2019.01-2019.04。 （12）企事业单位委托项目，柔性电子元器件的动态拉伸及疲劳性能测试，起止时间：2016.12-2017.05。 （13）企事业单位委托项目，广州市凤凰山隧道工程桥梁施工监控，起止时间：2015.08-2018.12。 （14）企事业单位委托项目，马坝互通立交桥施工控制，起止时间：2013.01-2016.12。 代表性成果（论文、专利或专著、软件著作权、成果转化等） Li SY, Liu YP, Lv SL, Zou XL, Tang LQ, Zhou LC, Jiang ZY, Liu ZJ, Yang B*. An improved Monte Carlo method for quantitative analysis of transparency degradation caused by corneal edema. Translational Vision Science & Technology, 2025 （已录用） Zhong SH, Liu YP*, Chen JM, Tang LQ, Zhou LC, Jiang ZY, Liu ZJ, Yang B. Effect of subway speed and track irregularities on the fatigue life of e-type fastening clip under vehicle-track coupling dynamics. International Journal of Computational Materials Science and Engineering, 2025 （已录用） Lin YX, Liu YP*, Tang LQ, Zhou LC, Jiang ZY, Liu ZJ, Yang B. Dynamic mechanical properties of epoxy polymer concrete under cyclic impact considering the effects of confining pressure and strain rate. Journal of Building Engineering, 2024, 94: 109954 Cao YJ, Liu YP*, Tang LQ, Jiang ZY, Liu ZJ, Zhou LC, Yang B. Quantitative assessment of brain injury and concussion induced by an unintentional soccer ball impact. Injury, 2024, 55: 111658. Xiao QK, Chen CB, Liu ZJ, Zhou LC*, Liu YP*, Jiang ZY, Yang B, Tang LQ. Temperature-induced response reconstruction for the dynamic reliability assessment of bridge girders. Structures, 2023,58: 105374 Xiao QK, Liu YP, Chen CB, Zhou LC*, Liu ZJ*, Jiang ZY, Yang B, Tang LQ. Data-driven time-variant reliability assessment of bridge girders based on deep learning. Mechanics of Advanced Materials and Structures, 2023, 2253548: 1-14 Xu JJ, Tang LQ, Liu YP*, Zhou LC**, Chen JM, Jiang ZY, Liu ZJ, Yang B. Hybridization effects on ballistic impact behavior of carbon/aramid fiber reinforced hybrid composite. International Journal of Impact Engineering, 2023, 181: 104750 Ma DP, Liu C, Zhu HB, Liu YP*, Jiang ZY*, Liu ZJ, Zhou LC, Tang LQ. High fidelity 3D mesoscale modeling of concrete with ultrahigh volume fraction of irregular shaped aggregate. Composite Structures, 2022, 291: 115600. Li XH, Ma DP, Lu ZM, Liu YP*, Jiang ZY*, Tang LQ, Liu ZJ and Zhou LC. Experimental study of hygrothermal and ultraviolet aging on the flexural performance of epoxy polymer mortar. Acta Mechanica Solida Sinica, 2021, 34(4): 539-549. Lu ZM, Liu YP*, Liu ZJ, Jiang ZY, Tang LQ. Effective estimation of flexural damage and strength of double-layer laminated composite beam. Composite Structures, 2021, 264: 113706. Liu YP, Lu ZM, Yan XX, Liu ZJ*, Tang LQ*. Measurement and modelling of the vibration induced by working equipment on an offshore platform. Ocean engineering, 2021, 219: 108354. Ma DP, Liang ZM, Liu YP*, Jiang ZY*, Liu ZJ, Zhou LC and Tang LQ. Mesoscale modeling of epoxy polymer concrete under tension or bending. Composite Structures, 2021, 256: 113079. Zhang G, Tang LQ, Liu ZJ, Zhou LC*, Liu YP*, Jiang ZY. Machine-learning-based damage identification methods with features derived from moving principal component analysis. Mechanics of Advanced Materials and Structures, 2020, 27(21): 1789-1802. Ma DP, Liu YP, Zhang NL, Jiang ZY*, Tang LQ, Xi HF**. Micromechanical modeling of flexural strength for epoxy polymer concrete. International Journal of Applied Mechanics, 2017, 9(8): 1750117. Liu YP, Ma DP, Jiang ZY*, Xiao F, Huang XX, Liu ZJ, Tang LQ. Dynamic response of expanded polystyrene concrete during low-speed impact. Construction & Building Materials, 2016, 122: 72-80. Xie BX, Tang LQ, Liu YP*, Liu ZJ, Jiang ZY. Research on the energy-absorption properties of aluminum foam composite panels with enhanced ribs subjected to uniform distributed loading. Journal of Sandwich Structures and Materials, 2015, 17(2): 170-182. Xi HF, Tang LQ, Yu JL, Zhang XY, Xie BX, Liu YP*, Jiang Z Y, Liu Z J. Low velocity penetration mechanical behaviors of aluminum foam sandwich plates at elevated temperature. International Journal of Structural Stability and Dynamics, 2015, 15(4): 1-18. Komijani M, Esfahani S E, Reddy JN, Liu YP*, Eslami MR. Nonlinear thermal stability and vibration of pre/post-buckled temperature and microstructure-dependent functionally graded beams resting on elastic foundation. Composite Structures, 2014, 112: 292–307. Liu YP, Tang LQ, Ai SG, Liu ZJ, He TH, Jiang ZY, Fang DN. Design and mechanical properties of liquid rubber-based concrete. International Journal of Applied Mechanics, 2013, 5(1): 1-22. Liu YP, Xiao F, Liu ZJ, Tang LQ, Fang DN. Damage analysis of rectangular section composite beam under pure bending. International Journal for Computational Methods in Engineering Science & Mechanics, 2013, 14(2): 152-158.
|
