经审核,现将机械与汽车工程学院2017年度研究生学术论文奖申请者相关信息及相关材料进行公示,如下:
序号 | 姓名 | 收录类别 | 论文分区(类型) | 期刊名称 | 论文题目 | 作者姓名 | 发表日期 | 备注 |
1 | 康利梅 | SCI | 1区 | Acta Materialia | Bimodal titanium alloys with ultrafine lamellar eutectic structure fabricated by semi-solid sintering | C. Yang, L.M. Kang, X.X. Li, W.W. Zhang, D.T. Zhang, Z.Q. Fu, Y.Y. Li, L.C. Zhang, E.J. Lavernia | 2017.4.25 | 2017年毕业生 |
SCI | 2区 | Journal of Alloys and Compounds | Designing ultrafine lamellar eutectic structure in bimodal titanium alloys by semi-solid sintering | L.M. Kang, C. Yang, F.Wang, X.X. Li, D.Z. Zhu, W.W. Zhang, W.P. Chen, Y. Huan | 2017.1.22 | |||
SCI | 2区 | Materials Science and Engineering: A | Bimodal eutectic titanium alloys: Microstructure evolution, mechanical behavior and strengthening mechanism | L.M. Kang, C. Yang, Y.J. Zhao, X.X. Li, S.G. Qu, W.W. Zhang, Y. Long, Z.Y. Xiao | 2017.5.25 | |||
SCI | 4区 | ACTA METALLURGICA SINICA(金属学报) | Fabrication of Novel Bimodal Titanium Alloy with High-Strength and Large-Ductility by Semi-Solid Sintering | L.M. Kang, C. Yang, Y.Y. Li | 2017.3.13 | |||
2 | 牛蕾 | SCI网络版 | 2区 | Applied Surface Science | A facile approach for the fabrication of 3D flower-like Cu2S nanostructures on brass mesh with temperature-induced wetting transition for efficient oil-water separation | Niu Lei, Kang zhixin | 2017.11 | 2018年应届生 |
3 | 尹晨欢 | SCI网络版 | 4区 | Journal of Macromolecular Science, Part B-Physics | Study of Energy Consumption in the Injection Moldding Process | Wen Jinsong, Yin Chenhuan,Jiang Shuncheng, Jin Gang | 2017.08 | 2018年应届生 |
4 | 张艳 | SCI网络版 | 四区 | Surface and Interface Analysis | Surface functionalization of multiwalled carbon nanotubes by the photo‐responsive strategy of π‐π stacking and azide‐ grafting | Yan Zhang, Zhixin Kang, Takeshi Bessho | 2017.05.17 | 2017年毕业生 |
5 | 张洋 | SCI网络版 | 二区 | Nanotechnology | Two-component spin-coated Ag/CNT composite films based on a silver heterogeneous nucleation mechanism adhesion-enhanced by mechanical interlocking and chemical grafting magnesium | Yang Zhang, Zhixin Kang, Takeshi Bessho | 2017.02.08 | 2018年应届生 |
SCI网络版 | 二区 | Journal of Industrial and Engineering Chemistry | Synthesis of Ag/CNT composite films on photo-grafted polyimide substrate by two component spin-spray deposition | Yang Zhang, Zhixin Kang, Takeshi Bessho, Hidetoshi Hirahara, Jing Sang | 2017.11.25 | |||
6 | 刘坤 | EI |
| 仪器仪表学报 | 特征点辅助的时空上下文目标跟踪与定位 | 翟敬梅,刘坤 | 2017年11月 | 2018年应届生 |
7 | 林庆宏 | SCI网络版 | 二区 | Applied Thermal Engineering | Flow characteristics and heat transfer performance of half-corrugated microchannels | Wan Zhenping(导师),Lin Qinghong,Wang Xiaowu,Tang Yong | 2017.05.31 | 2018年应届生 |
8 | 冯振飞 | SCI网络版 | 二区 | Applied Thermal Engineering | Numerical investigation on laminar flow and heat transfer in rectangular microchannel heat sink with wire coil inserts | 冯振飞,罗小平,郭峰,李海燕,章金鑫 | 2017年4月 | 2018年应届生 |
EI(Compendex) |
| 中国石油大学学报(自然科学版) | 微柱体对微通道热沉综合性能影响的数值分析 | 冯振飞,罗小平,郭峰,李海燕,王兆涛 | 2017年6月 | |||
9 | 绳瑞达 | SCI网络版 | 3区 | Diamond & Related Materials | Effect of unbonded hydrogen on amorphous carbon film deposited by PECVD with annealing treatment | Ruida Sheng, Liejun Li, Dongyi Su, Jihua Peng, Jixiang Gao, Kelun Zhao, Zhengwu Peng | 2017.12.05 | 2018年应届生 |
10 | 李海燕 | EI |
| 《化工进展》 | 粗糙度对微细通道纳米流体临界热流密度(CHF)和不稳定性的影响 | 罗小平,李海燕 | 2017.11.5 | 2018年应届生 |
11 | 倪建龙 | SCI网络版 | A novel force feedback model for virtual robot teaching of belt lapping | Li, JR (Li, Jing-Rong); Ni, JL (Ni, Jian-Long) ; Xie, HL (Xie, Hai-Long) ; Wang, QH (Wang, Qing-Hui) | 2017年12月 | 2017年毕业生 | ||
12 | 李鸣珂 | SCI网络版 | 3区 | Rapid Prototyping Journal | A new two-step adaptive direct slicingapproach forbio-scaffoldsintissue engineering | WangYu.Liu, MingKe.Li | 2017/12/6 | 2018年应届生 |
13 | 杜明艺 | SCI | 三区 | Materials Chemistry and Physics | Mingliang Ge,Mingyi Du,Luoyun Zheng,Bingying Wang,Xiangyang Zhou,Zhixin Jia,Guoqing Hu,S.M. Jahangir Alam | 2017.05.01 | 2017年毕业生 | |
14 | 麦青群 | SCI网络版 | 3区 | International Journal of Advanced Manufacturing Technology | A new geometrical model of the formation of machined surface | Mai Qingqun, Quan Yanming, Peijie Liu, Guo Ding | 2017年8月 | 2017年毕业生 |
15 | 李杰鸿 | SCI网络版 | SCI二区 | Mechanical Systems and Signal Processing | Damping-tunable energy-harvesting vehicle damper with multiple controlled generators: Design, modeling and experiments | Longhan Xie, Jiehong Li, Xiaodong Li, Ledeng Huang, Siqi Cai | 2017年7月 | 2018年应届生 |
SCI网络版 | SCI二区 | IEEE/ASME Transactions on Mechatronics | Electromagnetic Energy-Harvesting Damper With Multiple Independently Controlled Transducers: On-Demand Damping and Optimal Energy Regeneration | Longhan Xie, Jiehong Li, Siqi Cai, Xiaodong Li | 2017年9月 | |||
16 | 何建良 | SCI | 二区 | Materials | Constitutive Equation and Hot Compression Deformation Behavior of Homogenized Al-7.5Zn-1.5Mg-0.2Cu-0.2Zr Alloy | Jianliang He, Datong Zhang, Weiweng Zhang, Cheng Qiu, Wen Zhang | 2017.10.18 | 2018年应届生 |
17 | 赖文林 | SCI网络版 | 2区 | Renewable Energy | Cutting copper fiber/paraffin composite phase change material discharging experimental study based on heat dissipation capability of Li-ion battery | Pan Minqiang, Lai Wenlin | Dec. 2017 | 2018年应届生 |
18 | 曹小兵 | EI |
| 华南理工大学学报(自然科学版) | 机械振动对挤压铸造A356铝合金组织与性能的影响 | 周照耀,曹小兵,秦杰,肖志瑜 | 2017.2.15 | 2018年应届生 |
19 | 汤胜龙 | SCI网络版 | 1区 | IEEE Transactions on Industrial Informatics | A Manufacturing Big Data Solution for Active Preventive Maintenance | Jiafu Wan , Shenglong Tang ,Di Li,Shiyong Wang,Chengliang Liu,Haider Abbas,Athanasios V. Vasilakos | 2017.3.25 | 2018年应届生 |
SCI网络版 | 1区 | IEEE Internet of Things Journal | Context-Aware Cloud Robotics for Material Handling in Cognitive Industrial Internet of Things | Jiafu Wan, Shenglong Tang, Qinshong Hua, Di Li, Chengliang Liu, Jaime Lloret | 2017.7.15 | |||
20 | 唐恒 | SCI | 1区 | Energy Conversion and Management | Experimental investigation of the thermal performance of heat pipes with double-ended heating and middle-cooling | Heng Tang, Yong Tang, Baoshan Zhuang, Gong Chen, Shiwei Zhang | 2017.07.08 | 2018年应届生 |
SCI | 2区 | Applied Thermal Engineering | Experimental investigation of capillary force in a novel sintered copper mesh wick for ultra-thin heat pipes | Yong Tang, Heng Tang, Jie Li, Shiwei Zhang, Baoshan Zhuang, Yalong Sun | 2017.01.03 | |||
SCI | 2区 | Applied Thermal Engineering | Heng Tang, Yong Tang , Jie Li, Yalong Sun, Guanwei Liang, Ruitao Peng | 2017.12.06 | ||||
SCI | 2区 | Applied Thermal Engineering | Fabrication and capillary characterization of axially micro-grooved wicks for aluminium flat-plate heat pipes | Heng Tang, Yong Tang , Wei Yuan, Ruitao Peng, Longsheng Lu, Zhenping Wan | 2017.10.17 | |||
EI |
| 机械工程学报 | 超薄微热管的研究现状及发展趋势 | 汤勇,唐恒,万珍平, 袁 伟,陆龙生,李宗涛 | 2017.1 | |||
EI |
| 华南理工大学学报(自然科学版) | 表面织构流体动压润滑性能的研究进展 | 汤勇,唐恒,万珍平, 袁 伟,陆龙生,李宗涛 | 2017.09 | |||
21 | 周卫林 | EI |
| 《中国激光》》 | 基于深度分层特征的激光视觉焊缝检测与跟踪系统研究 | 邹焱飚,周卫林,陈向志 | 2017.04 | 2018年应届生 |
EI |
| 《机械工程学报》 | 基于概率连续模型的激光视觉焊缝自动跟踪 | 邹焱飚,周卫林,王研博 | 2017.05 | |||
22 | 王兴坤 | SCI | 3 | International Journal of Advanced Manufacturing Technology | A study on non-uniform deformation of backward flow forming and its influencing factors | Wang Xingkun,Xia Qinxiang,Cheng Xiuchuan,Xiao Gangfeng | Dec-17 | 2018年应届生 |
SCI | 4 | International Journal of Precision Engineering & Manufacturing | Deformation behavior of Haynes230 superalloy during backward flow forming | Wang Xingkun,Xia Qinxiang,Cheng Xiuchuan | Jan-17 | |||
23 | 朱宁远 | SCI | 4 | International Journal of Materials & Product Technology | The classification and a review of hot power spinning of difficult-to-deform metals | Xia Qinxiang,Zhu Ningyuan,Cheng Xiuchuan,Xiao Gangfeng | 2017年 | 2017年毕业生 |
EI |
| Journal of Central South University (Science and Technology) | Dynamic recrystallization microstructure evolution of Haynes230 alloy based on cellular automata | Zhu Ningyuan,Xia Qinxiang,Cheng Xiuchuan | 2017年11月 | |||
24 | 白玉超 | SCI | 二区 | Materials Science and Engineering: A | Influence mechanism of parameters process and mechanical properties evolution mechanism of maraging steel 300 by selective laser melting | 白玉超,杨永强,王迪,张明康 | 2017.8.4 | 2018年应届生 |
SCI | 二区 | Materials & Design | Process optimization and mechanical property evolution of AlSiMg0. 75 by selective laser melting | 白玉超,杨永强,肖泽锋,张明康,王迪 | ||||
25 | 陈文军 | SCI网络版 | 2区 | International Journal of Hydrogen Energy | Utilization and positive effects of produced CO2 on the performance of a passive direct methanol fuel cell with a composite anode structure | Wenjun Chen, Wei Yuan, Guangzhao Ye, Fuchang Han, Yong Tang | 2017.5.30 | 2018年应届生 |
26 | 戴卓 | SCI网络版 | 3区 | Journal of Loss Prevention in the Process Industries | Analysis of explosion accidents with heat recirculation dryers and their inherent safety improvement | Zhen Tian, Zhuo Dai | 2017 | 2018年应届生 |
27 | 曾健 | SCI网络版 | 2区 | International Journal of Heat and Mass Transfer | Flow boiling characteristics of micro-grooved channels with reentrant cavity array at different operational conditions | JianZeng, ShiweiZhang, YongTang, Yalong Sun, WeiYuan | 2017.11 | 2017年毕业生 |
SCI网络版 | 2区 | International Journal of Heat and Mass Transfer | Fabrication and capillary characterization of micro-grooved wicks with reentrant cavity array | Jian Zeng, Lang Lin, Yong Tang, Yalong Sun, Wei Yuan | 2017.01 | |||
SCI网络版 | 2区 | Applied Thermal Engineering | Experimental investigation on thermal performance of aluminum vapor chamber using micro-grooved wick with reentrant cavity array | JianZeng, ShiweiZhang, GongChen, LangLin, Yalong Sun, Lin Chuai, WeiYuan | 2018.02(accepted 2017.11) | |||
28 | 况太荣 | SCI | 二区 | Composites Part B-Engineering | Poly (propylene carbonate)-based in situ nanofibrillar biocomposites with enhanced miscibility, dynamic mechanical properties, rheological behavior and extrusion foaming ability | Tairong Kuang,Kaican Li,Binyi Chen, Xiangfang Peng | Aug 15 2017 | 2017年毕业生 |
29 | 朱梦蝶 | SCI | 2区 | Scripta Materialia | Influence of powder properties on densification mechanism during spark plasma sintering | C.Yang, M.D.Zhu, X.Luo, L.H.Liu, W.W.Zhang, Y.Long, Z.Y.Xiao, Z.Q.Fu, L.C.Zhang, E.J.Lavernia | 2017.6.18 | 2018年应届生 |
30 | 胡鹏飞 | SCI网络版 | JCR 3区 | International Journal of Advanced Manufacturing Technology | Application of fuzzy control method in gas metal arc welding | 胡鹏飞,黄俊森,曾敏 | 2017.9 | 2018年应届生 |
31 | 林浪 | SCI网络版 | 一区 | Energy Conversion and Management | Thermal management of high-power LEDs based on integrated heat sink with vapor chamber | 导师第一本人第二 | 2017.8.24 | 2018年应届生 |
32 | 刘德晖 | SCI网络版 | 二区 | Materials | Temperature uncertainty analysis of injection mechanism based on Kriging modeling | Dongdong You, Dehui Liu, Xiaomo Jiang, Xueyu Cheng, Xiang Wang. | 2017, 10(11):1319. | 2018年应届生 |
33 | 李小敏 | SCI | 4 | WIRELESS NETWORKS | A review of industrial wireless networks in the context of Industry 4.0 | Li, Xiaomin; Li, Di; Wan, Jiafu; 等. | 2017.06 | 2018年应届生 |
SCI | 3 | IEEE ACCESS | Exploiting Industrial Big Data Strategy for Load Balancing in Industrial Wireless Mobile Networks | Li, Xiaomin; Li, Di; Li, Song; 等. | 2017.12 | |||
SCI | 3 | COMPUTER NETWORKS | A cloud-assisted handover optimization strategy for mobile nodes in industrial wireless networks | Li, Di; Li, Xiaomin; Wan, Jiafu | 201.12 | |||
34 | 罗锡才 | SCI | 2区 | Materials | Ductility Improvement of an AZ61 Magnesium Alloy through Two-Pass Submerged Friction Stir Processing | 罗锡才(第一) | 2017/2/24 | 2018年应届生 |
35 | 何迪 | SCI网络版 | 3区 | The International Journal of Advanced Manufacturing Technology | Investigation of interference effects on the burnishing process | Di He,Bin Wang, Jiayang Zhang, Shaofeng Liao,Wen Jun Deng | 2017/6/5 | 2018年应届生 |
36 | 黄照夏 | SCI网络版 | 3区(B类) | Materials and Manufacturing Processes | Manufacturing polymer/clay nanocomposites through elongational flow technique | Zhao-Xia Huang, Cong Meng, Guizhen Zhang, Jin-Ping Qu | 2017.9.10 | 2018年应届生 |
37 | 刘二辉 | EI |
| 计算机集成制造系统 | 基于改进遗传算法的自动导引小车路径规划及其实现平台 | 刘二辉,姚锡凡 | 2017.03 | 2018年应届生 |
38 | 王佳佳 | SCI | 三区 | The International Journal of Advanced Manufacturing Technology | Double arc interference and dynamic behavior characteristics of double wire double-pulsed GMAW | Kaiyuan Wu,Jiajia Wang,Yin Tong,Zuwei He,Zhuoyong Liang | 2018, 95(1-4): 991-1002 | 2018年应届生 |
EI |
| 华南理工大学学报(自然科学版) | 电动车LLC谐振充电电源系统 | 吴开源,王佳佳,尹彤,章涛 | 2017, 45(4): 51-58 | |||
39 | 王亮 | SCI | 4 | Journal of Polymer Engineering | Preparation and characterization of carbon fiber/polylactic acid/thermoplastic polyurethane (CF/PLA/TPU) composites prepared by a vane mixer | Yin Xiaochun, Wang Liang, Li Sai, He Guangjian, Yang Zhitao, Feng Yanhong, Qu Jinping | 2017年5月 | 2018年应届生 |
40 | 吴婷 | SCI网络版 | 3区(B类) | Polymer Testing | Polypropylene/polystyrene/clay blends prepared by an innovative eccentric rotor extruder based on continuous elongational flow: Analysis of morphology, rheology property, and crystallization behavior | Ting Wu,Ding Yuan,Feng Qiu,Rong-yuan Chen,Guizhen Zhang,Jinping Qu | 2017.7.12 | 2018年应届生 |
SCI网络版 | 3区(B类) | Polymers for Advanced Technologies | Morphology, rheology property, and crystallization behavior of PLLA/OMMT nanocomposites prepared by an innovative eccentric rotor extruder | Ting Wu,Yuru Tong, Feng Qiu,Ding Yuan,Guizhen Zhang,Jinping Qu | 2017.6.28 | |||
41 | 谢恒 | SCI网络版 | 1区 | Nanoscale | Rapid fabrication of bio-inspired nanostructure with hydrophobicity and antireflectivity on polystyrene surface replicating from cicada wings | Heng Xie, Hanxiong Huang, Yujiang Peng | 2017.9 | 2018年应届生 |
SCI网络版 | 3区 | Polymer Engineering & Science | Design and application of flexible insert for microinjection compression molding polymer microlens arrays with tunable height | Heng Xie, Hanxiong Huang, Anfu Chen | 2017.3 | |||
42 | 张嘉阳 | SCI网络版 | 2016年JCR分区(工程技术)3区 | International Journal of Simulation Modelling | Simulation Analysis of a New Chips Recycling Process Termed Forming Extrusion Cutting | Deng, W. J., Zhang, J. Y., Liu, L. W., He, D., Xia, W | 2017/12/1 | 2018年应届生 |
43 | 丁霞 | SCI网络版 |
| 稀有金属材料与工程 | Al0.25Cu0.75FeNiCo颗粒增强铝合金的组织与性能 | 朱德智,丁霞,戚龙飞,陈奇 | 2017.11 | 2017年毕业生 |
44 | 占旺龙 | EI |
| 华南理工大学学报(自然科学版) | 线接触弹性磨损的数值分析 | 占旺龙,黄平 | 2017年5月 | 2018年应届生 |
45 | 邱光琦 | SCI | 4区 | ADVANCES IN MECHANICAL ENGINEERING | Automatic segmentation and prognostic method of a turbofan engine using manifold learning and spectral clustering algorithms | Qiu Guangqi, Huang Si, Chen Yu | 2017年9月 | 2017年毕业生 |
SCI | 2区 | RENEWABLE ENERGY | Performance prediction of a centrifugal pump as turbine using rotor-volute matching principle | Huang, Si, Qiu Guangqi,Su Xianghui, Chen Junrong, Zou Wenlang | 2017年8月 | |||
EI |
| 多状态系统的动态可靠性度量及重要度分析 | 邱光琦,黄思, 古莹奎 | 2017年5月 | ||||
46 | 侯朝睿 | SCI | 三区 | Textile research journal | Effect of a sizing agent on short carbon fiber production with radial chopping technology | Zhaorui Hou | 2017年5月 | 2017年毕业生 |
47 | 陈鑫 | SCI | 三区 | IEEE access | Frequency-Tracking Clock Servo for Time Synchronization in Networked Motion Control Systems | Xin Chen, Di Li, Shiyong Wang, Hao Tang, Chengliang Liu | 2017.6 | 2017年毕业生 |
EI |
| A Survey on Real-Time Ethernet | International Journal of Autonomous and Adaptive Communications | Xin Chen, Di Li | 2017.12 | |||
48 | 倪释凌 | SCI网络版 | 1区 | CORROSION SCIENCE | Saltwater corrosion behavior of cold sprayed AA7075 aluminum alloy coatings | Sieglind Ngai, Tungwai Ngai, Florian Vogel, William Story, Gregory B. Thompson, Luke N. Brewer | 2017/10/31 | 2018年应届生 |
49 | 王晗 | SCI | 3区 | Journal of Micromechanics and Microengineering | Method of orientation control and experimental investigation using a liquid-drop micromanipulator | Zhang Qin, Wang Han, Gan Yuming, Hisayuki Aoyama | Apr-17 | 2018年应届生 |
50 | 耿立宏 | SCI网络版 | 1区 | ACS applied materials & interfaces | Superior Impact Toughness and Excellent Storage Modulus of Poly(lactic acid) Foams Reinforced by Shish-Kebab Nanoporous Structure. | Geng, L. H.; Li, L. W.; Mi, H. Y.; Chen, B. Y.; Sharma, P.; Ma, H. Y.; Hsiao, B. S.; Peng, X. F.; Kuang, T. R. | 2017/6/8 | 2018年应届生 |
SCI网络版 | 2区 | Cellulose | Structure Characterization of Cellulose Nanofiber Hydrogel as Functions of Concentration and Ionic Strength. | Geng, L. H.; Peng, X. F.; Zhan, C. B.; Naderi, A.; Sharma, P. R.; Mao, Y. M.; Hsiao, B. S. | 2017/10/9 | |||
SCI网络版 | 2区 | Materials & Design | Strength and Modulus Improvement of Wet-spun Cellulose I Filaments by Sequential Physical and Chemical Cross-Linking. | Geng, L. H.; Chen, B. Y.; Peng, X. F.; Kuang, T. R. | 2017/9/23 | |||
51 | 水琰 | SCI网络部 | 二区 | International Journal of Thermal Sciences | Numerical and experimental analysis of transient temperature field of ventilated disc brake under the condition of hard braking | Qifei Jian,Yan Shui | Dec-17 | 2018年应届生 |
52 | 孙同阳 | SCI网络版 | JCR 4区 | Journal of Healthcare Engineering | Inertial Sensor-Based Motion Analysis of Lower Limbs for Rehabilitation Treatments | Tongyang Sun, Hua Li, Quanquan Liu, Lihong Duan, Meng Li, Chunbao Wang, Qihong Liu, Weiguang Li, Wanfeng Shang, Zhengzhi Wu, Yulong Wang | 2017/7/5 | 2018年应届生 |
53 | 谭振豪 | SCI网络版 | 4区 | THE CANADIAN JOURNAL OF CHEMICAL ENGINEERING | Dimensional Effect of Graphite Flow Field Channels of a Direct Methanol Fuel Cell under Different Operating Conditions | Zhenhao Tan, Aoyu Wang, Wei Yuan, Fuchang Han, Guangzhao Ye, Hongrong Xia and Yong Tang | 2017.07.05 | 2018年应届生 |
54 | 徐笑天 | SCI网络版 | 4区 | International Journal of Green Energy | Developing a passive air-breathing tubular direct methanol fuel cell fed with concentrated methanol | Wei Yuan(导师), Xiaotian Xu, Fuchang Han, Guangzhao Ye Yong Tang | 2017.7.31 | 2018年应届生 |
55 | 梁志豪 | SCI网络版 | 3区 | Energies | Research on a novel hydraulic/electric synergy bus | Kegang Zhao, Zhihao Liang,Yanjun Huang,Hong Wang,Amir Khajepour, Yuke Zhen | 2017/12/24 | 2018年应届生 |
56 | 吕少茵 | EI(Compendex) |
| 高分子材料科学与工程 | 乙腈对环己烷单体溶液中沉降聚合聚3,4-乙撑二氧噻吩涂层结构与光电性能的影响 | 吕少茵,李建雄,马亚晓 | 2017.4.20 | 2018年应届生 |
57 | 彭于江 | SCI网络版 | 1区 | Solar Energy Materials and Solar Cells | Rapid fabrication of antireflective pyramid structure on polystyrene film used as protective layer of solar cell | 彭于江,黄汉雄,谢恒 | 2017.11 | 2018年应届生 |
58 | 苏洪华 | SCI网络版 | JCR分区 2区 | Microfluid Nanofluid | Experimental study on self‑fowing speed in microchannel related to micro‑/nanoscale surface topographies | J. Xie, H.H.Su,J. J. Liao, J. Liu | 2017.06.08 | 2018年应届生 |
59 | 王永南 | SCI网络版收录 | JCR 2区 | International Journal of Heat and Mass Transfer | Flow boiling characteristics in microchannels with half- corrugated bottom plates | Zhenping Wan, Yongnan Wang, Xiaowu Wang, Yong Tang | 2017.9.20 | 2018年应届生 |
60 | 范吉斌 | SCI网络版 | 4区 | Japanese journal of applied physics | Zhang Qin,Fan Jibin,Hisayuki Aoyama | 2017.12 | 2018年应届生 | |
61 | 朱继元 | SCI网络版 | 3区 | Surface& Coatings Technology | A novel route for fabrication of the corrosion-resistant superhydrophobic surface by turning operation | Jiyuanzhu, Xiaofanghu | 2017 | 2017年毕业生 |
SCI网络版 | 2区 | Materials Letters | A novel and facile fabrication of superhydrophobic surfaces on copper substrate via machined operation | Jiyuanzhu, Xiaofanghu | 2017 | |||
62 | 赵延杰 | SCI网络版 | 2 | Materials Letters | High-strength silicon brass manufactured by selective laser melting | C. Yang, Y.J. Zhao, L.M. Kang, D.D. Li, W.W. Zhang, L.C. Zhang | 2017.9 | 2018年应届生 |
63 | 王奥宇 | SCI网络版 | 1区 | Applied Energy | Structural effects of expanded metal mesh used as a flow field for a passive direct methanol fuel cell | Aoyu Wang, Wei Yuan, Shimin Huang, Yong Tang, Yu Chen | 2017.12.15 | 2018年应届生 |
SCI网络版 | 1区 | Applied Energy | Dynamic relationship between the CO2 gas bubble behavior and the pressure drop characteristics in the anode flow field of an active liquid-feed direct methanol fuel cell | Wei Yuan, Aoyu Wang, Guangzhao Ye, Baoyou Pan, Kairui Tang, Haimu Chen | 2017.02.15 | |||
64 | 陈杰凌 | SCI网络版 | 二区 | Applied Thermal Engineering | Effect of operational parameters on flow boiling heat transfer performance for porous interconnected microchannel nets | Jieling Chen, Shiwei Zhang, Yong Tang, Haimu Chen, Wei Yuan, Jian Zeng | 2017/4/24 | 2018年应届生 |
65 | 孙佳伟 | SCI网络版 | 二区 | International Journal of Heat and Mass Transfer | Influence of electrochemical deposition parameters on capillary performance of a rectangular grooved wick with a porous layer | Longsheng Lu , Jiawei Sun , Qiaopeng Liu , Xiaokang Liu , Yong Tang | 2017.02.27 | 2018年应届生 |
66 | 闫志国 | SCI网络版 | 二区 | Journal of Alloys and compounds | Hierarchical MCMB-CuO-Cu anode with super-hydrophilic substrate and blind-hole structures for lithium-ion batteries | Wei Yuan(导师), Zhiguo Yan, Baoyou Pan, Zhiqiang Qiu, Jian Luo, Zhenhao Tan, Yong Tang, Zongtao Li | 2017/5/20 | 2018年应届生 |
67 | 陈灿 | SCI网络版 | 2区 | Applied Thermal Engineering | Effects of structural parameter on flow boiling performance of interconnected microchannel net | Yong Tang, Can Chen, Shiwei Zhang, Yalong Sun, Jian Zeng, Wei Yuan, Zongtao Li | 2017 | 2018年应届生 |
68 | 胡启耀 | SCI | 2区 | Materials Science and Engineering A | Microstructures and properties of SiC particles reinforced aluminum-matrix composites fabricated by vacuum-assisted high pressure die casting | Qiyao Hu, Haidong Zhao, Fangdong Li | 2017/1/5 | 2017年毕业生 |
69 | 贾梅生 | SCI网络版 | 4区 | Fire Safety Journal | An innovative framework for determing the damage probability of equipment exposed to fire | Meisheng Jia, Guohua Chen, Genserik Reniers | 2017.09 | 2017年毕业生 |
SCI网络版 | 3区 | Journal of Loss Prevention in the Process Industries | Equipment vulnerability assessment (EVA) and pre-control of domino effects using a five-level hierarchical framework (FLHF) | Meisheng Jia, Guohua Chen, Genserik Reniers | 2017.07 | |||
EI (Compendex) | / | 化工进展 | 化工园区多米诺事故风险评价与防控技术综述 | 贾梅生,陈国华,胡昆 | 2017.04 | |||
EI (Compendex) | / | 化工进展 | 火灾环境液化石油气卧罐稳定性与静态可靠性分析 | 贾梅生,陈国华 | 2017.07 | |||
EI (Compendex) | / | 化工进展 | 火灾环境液化石油气卧罐动态可靠性分析 | 贾梅生,陈国华 | 2017.09 | |||
70 | 刘锐哲 | SCI | 3 | Materials Characterization | Effect of particle size on pore three-dimensional characteristics of SiCp preforms by X-ray micro-computed tomography | Ruizhe Liu, Haidong Zhao, Han Long, Bin xie | 2017.11.7 | 2018年应届生 |
71 | 王良旺 | SCI | 三区 | IEEE transactions on dielectrics and electrical insulation | Dynamic distribution of electrostatic charge and potential in oil tanks during filling process | 王良旺、陈国华 | 2017.1 | 2017年毕业生 |
EI |
| 华南理工大学学报(自然科学版) | 立式柱形油品储罐充装中静电电势的动态分布 | 王良旺、陈国华 | 2017.6 | |||
72 | 林德佳 | SCI网络版 | 2016年JCR分区(大类)(二区) | Composite Structures | Numerical simulations of impact fracture behavior of an automotive windshield glazing: An intrinsic cohesive approach | Dejia Lin, Di Wang, Shunhua Chen, Mengyan Zang | 2017.11 | 2018年应届生 |
EI(Compendex) |
| 机械工程学报 | 基于内聚力模型的夹层玻璃冲击破坏仿真分析 | 林德佳,臧孟炎 | 2017.11 | |||
73 | 陈祥辉 | SCI网络版 |
| 《高分子学报》 | 低含量聚乳酸对微孔发泡聚丁二酸丁二醇酯泡孔结构的改善 | 陈祥辉,黄汉雄 | 2017.07.05 | 2017年毕业生 |
74 | 张梦迪 | SSCI网络版 | 2016年JCR分区(二区) | ACS SUSTAINABLE CHEMISTRY & ENGINEERING | High Oxygen Barrier Property of Poly(propylene carbonate)/Polyethylene Glycol Nanocomposites with Low Loading of Cellulose Nanocrytals | 蒋果,张梦迪,冯健,张水洞,王小慧 | 2017年10月 26日 | 2018年应届生 |
75 | 林晓辉 | SCI网络版 | SCI二区 | Smart Materials and Structures | Crack detection in plastic pipe using piezoelectric transducers based on nonlinear ultrasonic modulation | Xiaobin Hong, Xiaohui Lin, Bo Yang, Maodong Li | 2017.1 | 2018年应届生 |
76 | 张晓清 | SCI网络版 | 2016年JCR分区(大类)2区 | Journal of Alloys and Compounds | Characterization and performance of Cu(In,Ga)Se2 thin films incorporating low-temperature pre-annealing process | Zhang Xiaoqing, Huang Yunxiang, Yuan Wei, Tang Yong | 2017.12.25 | 2018年应届生 |
SCI网络版 | 2016年JCR分区(大类)2区 | Materials Letters | Fabrication of homogeneous CIGS thin film by plasma-enhanced Se vapor selenization coupled with etching process | Zhang Xiaoqing, Huang Yunxiang, Yuan Wei, Tang Yong, Li Lin | 2017.03.01 | |||
SCI网络版 | 2016年JCR分区(大类)2区 | Journal of Alloys and Compounds | Investigation on the performance of Mo2N thin film as barrier layer against Fe in the flexible Cu(In,Ga)Se2 solar cells on stainless steel substrates | Li Lin, Zhang Xiaoqing, Huang Yunxiang, Yuan Wei, Tang Yong | 2017.03.25 | |||
77 | 杨杰 | EI |
| 振动与冲击 | 3-RRR柔性平面并联机器人自激振动控制 | 杨杰,邱志成,张宪民 | 2017.1 | 2017年毕业生 |
78 | 田国强 | SCI网络版 | 4区 | Fiber breakage behavior of long glass fiber-reinforced polypropylene through the convergent channel | Guoqiang Tian, Xianrong Liang, Mengmeng Wang, Yu Lei, Gang Jin, Xiaolin Wang | 2017年11月 | 2018年应届生 | |
79 | 曹罗香 | EI |
| 高分子材料科学与工程 | 聚丙烯/有机磷盐改性麦羟硅钠石纳米复合材料的制备与性能研究 | 戈明亮,曹罗香,杜明艺,王雁武,胡国清 | 2017.11 | 2018年应届生 |
80 | 郭峰 | EI |
| 化工进展 | 微细通道内浓度对纳米制冷剂流动沸腾压降波动影响 | 罗小平,郭峰,谢鸣宇,张霖 | 2017.05 | 2018年应届生 |
81 | 李辉 | SCI网络版 | 二区 | International Journal of Heat and Mass Transfer | Numerical analysis on heat transfer of a complete anti-gravity loop- shaped heat pipe | Hui Li, Yong Tang, Wei Yuan, Rui Zhou | 2017/3/19 | 2017年毕业生 |
82 | 陈德馨 | SCI网络版 | SCI 二区 | Journal of Industrial and Engineering Chemistry | Molecular grafting to improve adhesion of spray-deposited circuits on polymeric surface for flexible electronics | 陈德馨,康志新,别所毅 | 2017/8/25 | 2018年应届生 |
83 | 黄云翔 | SCI网络版 | 2区 | Solar Energy | Coupled effect of pre-alloying treatment and plasma-assisted Se vapor selenization process in Cu(In, Ga)Se2 thin film | Yunxiang Huang, Yong Tang, Wei Yuan, Xiaoqing Zhang, Qinghui Wang | 2017.7.1 | 2017年毕业生 |
实物材料公示地址:19号楼203室
公示日期:2018年6月1日至6月7日
公示期间若对申请人的材料有异议,可通过书面、邮件或电话等方式向学院研究生教务室反映。反映情况时要自报或签署真实姓名并有具体事实根据,不报或不签署真实姓名以及不提供具体事实依据的,一律不予受理。
联系人:杨老师、梁老师 电话:22236360 邮箱:byyang@scut.edu.cn
机械与汽车工程学院
2018年6月1日