Professor, Ph D
School of Mechanical and Automotive Engineering
South China University of Technology
Guangzhou, P. R. China
Email: mebcao@scut.edu.cn
Mobile: +8613825043678
Education
Ph. D.Welding Technology and Equipment, Harbin Institute of Technology, 1991
M. S.Welding Technology and Equipment, Harbin Institute of Technology, 1987
B. S.Aeronautical Welding, Nanchang Institute of Aeronautical Technology, 1984
Professional Experience
12/2006-current Professor, School of Mechanical and Automotive Engineering, South China University of Technology
11/1995-12/2006 Associate Professor, Department of Mechanical and Electrical Engineering, South China University of Technology
09/1999/10/2000 Visiting Scholar, Berlin Institute of Technology
10/1991-11/1995 Lecturer, Department of Mechanical Engineering, South China University of Technology
Publications
1.Li Haibo, Biao Cao*. Modeling and analysis of resistance spot welding based on neural network. China Welding, 2015, 24(2): 57-62.
2.Kai Yang, Biao Cao*. Electrical characteristics identification of dielectric film breakdown during plasma electrolytic oxidation process. Materials Letters, 2015, 143(3): 177-180.
3.Jingwei Yang, Biao Cao*. Investigation of resistance heat assisted ultrasonic welding of 6061 aluminum alloys to pure copper. Materials and Design, 2015, 74,19-24.
4.Cao Biao*, Li Hai-bo, Pang Shao-hui. Control of power source for AC inverter resistance welding on the basis of DSP. Journal of South China University of Technology (Nature Science Edition), 2015, 43(3):9-14. (in Chinese)
5.Yang Kai, Cao Biao*, Liu Han-Bo. Design of precision inverter power supply for micro arc welding. Journal of South China University of Technology (Nature Science Edition), 2015, 43(6): 24-29. (in Chinese)
6.J.W. Yang, B. Cao*, X.C. He, H.S. Luo. Microstructure evolution and mechanical properties of Cu-Al joints by ultrasonic welding. Science and Technology of Welding and Joining, 2014, 19(6):500-504.
7.Yang Kai, Cao Biao*, Ding Li, Yang Guang, Huang Zenghao. Design of high frequency narrow pulsed inverter power source for micro-arc oxidation. Journal of South China University of Technology (Nature Science Edition), 2014, 42(9): 18-23. (in Chinese)
8.Yang Jingwei, Cao Biao*, Yin Tiangang. Process optimization of ultrasonic welding parameters for copper to copper joints. China Welding, 2013, 22(2):12-17.
9.Li Haibo，Cao Biao*. Design and characteristics analysis of spot welding servo pressure device. Transaction of the China Welding Institution, 2013, 34(9): 91-94. (in Chinese)
10.Yang Jingwei, Cao Biao*, Yin Tiangang. Research on ultrasonic metal welding power supply based on DSP. Transaction of the China Welding Institution, 2012, 33(7): 29-33. (in Chinese)
11.Zeng Gengxin, Cao Biao*,Zeng Haiquan. Vibration analysis on magnetostrictive power ultrasonic transducer. Journal of Vibration, Measurement & Diagnosis, 2011, 31(5):614-617. (in Chinese)
12.Zeng Min, Ma Cheng, Cao Biao, Fan Fengxin. A novel high-power inverter-based resistance spot welding power supply.Transactions of the China Welding Institution, 2010, 31(7):55-58. (in Chinese)
13.Cao Biao*, Huang Zhihua.Research on precision resistance seam welding inverter.Transactions of the China Welding Institution, 2009, 30(12):45-48. (in Chinese)
14.Cao Biao*, Fan Fengxin, Zeng Min, Shao Lanjuan. Development of precise inverterreflow-solderingpowersupplywithwaveformcontrol. Transactions of the China Welding Institution, 2009, 30(6):67-70. (in Chinese)
15.Zeng Min, Wang Xiaodong, Cao Biao, Jiang Wei. Research on inverter power equipment of microarc oxidation. Transactions of the China Welding Institution, 2009, 30(6):47-50. (in Chinese)
16.Cao Biao*, Wang Xiaodong, Fan Fengxin, Li Jianguo. Design of transistor-style high-frequency resistance spot-welding power supply. Transactions of the China Welding Institution, 2009, 30(7):73-76. (in Chinese)
17.Zeng Min, Chen Xiaohong, Cao Biao, Jiang Wei, Liu Fang, Wang Xiaodong. Control system of micro-arc oxidation inverter power supply. Journal of South China University of Technology (Natural Science Edition), 2009, 37 (2): 40-44. (in Chinese)
18., , . Micro-arc oxidation inverter power supply based on the limited bipolar soft-switch control method. Chinese Journal of Mechanical Engineering (English Edition), 2009, 22( 3):390-394.
19.Xiang Yuanpeng, Cao Biao*, Zeng Min, Huang Shisheng, Shao Lanjuan. Determining chaotic invariant properties of short-circuiting gas metal arc welding from an observed time series. China Welding, 2008, 17(3):30-33.
20.Cao Biao*, Xiang Yuanpeng, Lv Xiaoqing, Zeng Min, Huang Shisheng. Approximate entropy–a new statistic to quantify arc and process stability in short-circuiting gas metal arc welding. Chinese Physics B, 2008, 17(3):865-877.
21.Cao Biao*, Lv Xiaoqing, Zeng Min, Huang Shisheng. Analysis of welding conditions in short-circuiting transition based on approximate entropy. Chinese Journal of Mechanical Engineering, 2007, 43(10):50-54.(in Chinese)
22., *, , . Effect of welding speed and electrode extension on the approximate entropy of welding current in short-circuiting GMAW. China Welding, 2007, 16(3):56-62.
23.Dai Leyang, Cao Biao, Zeng Meiqin, Ouyang Liuzhang, Zhu Min. Investigation of dielectric barrier discharge in air for materials surface modification by optical emission spectrometry. China Surface Engineering, 2007, 20(2):11-16. (in Chinese)
24.Cao Biao*, Ye Weiyuan, Huang Zenghao, Zeng Min. Intelligent quality monitor of inverted resistance spot welding of wire to phosphor-copper sheet in relay manufacturing. Transactions of the China Welding Institution, 2006, 27(9):47-50. (in Chinese)
25.Cao Biao*, Zhu Fangkun, Zeng Min, Liu Qingchang. Design of CO2 welding control system based on DSP. Power Electronics, 2006, 40(5):70-72. (in Chinese)
26.Cao Biao*, Lv Xiaoqing, Zeng Min, Wang Zhenmin, Huang Shisheng. Approximate entropy analysis of current in short-circuiting arc welding. Acta Physica Sinica, 2006, 55(4):1696-1705. (in Chinese)
27.Lv Xiaoqing, Cao Biao*, Zeng Min, Huang Shisheng, Liu Xiaoguang. An algorithm of selecting delay time in the mutual information method.Chinese Journal of Computational Physics, 2006, 23(2):184-188. (in Chinese)
28.Cao Biao*, Zeng Min, Huang Zenghao, Ye Weiyuan. Fuzzy control of arc length for current waveform controlled short circuiting arc welding under high-speed welding condition. Transactions of the China Welding Institution, 2005, 26(6):17-20. (in Chinese)
29.Lv Xiaoqing, Cao Biao*, Zeng Min, Huang Shisheng. Correlation dimension analysis of short circuiting gas metal arc welding process. Transactions of the China Welding Institution, 2005, 26(6):65-68. (in Chinese)
30.Lv Xiaoqing, Cao Biao*, Zeng Min, Huang Zenghao.Effects of current waveform parameters during droplet transfer on spatter in high speed waveform controlled short-circuiting GMA. China Welding, 2005, 14(2):121-124.
31.Cao Biao*, Huang Zenghao, Zeng Min. Measurement of welding current and voltage for resistance spot welding inverter. Journal of South China University of Technology, 2005, 33(7):56-60. (in Chinese)
32.Cao Biao*, Huang Zenghao, Huang Zhiming, Zeng Min. Multi parameter MCU measure system for resistance spot welding inverter. Machinery & Electronics, 2004, 10(10):26-28. (in Chinese)
33.Zeng Min, Cao Biao, Huang Shisheng, Lv Xiaoqing, Huang Zenghao. Research on waveform control method of short transition high-speed welding. Journal of Shang Hai Jiao Tong University, 2004, 38(7):1076-1080. (in Chinese)
34.Zeng Min, Cao Biao, Huang Shisheng, Lv Xiaoqing. Simulation research on waveform control high-speed welding system. Transaction of the China Welding Institution, 2003, 24(6):55-59. (in Chinese)
35.Zeng Min, Cao Biao, Huang Shisheng, Mao Pengjun，Lv Xiaoqing.Fuzzy control of pulsed gas metal arc welding. Chinese Journal of Mechanical Engineering, 2003, 39(11):113-116. (in Chinese)
36.Zeng Min, Cao Biao, Huang Shisheng, Meng Yongmin，Mao Pengjun. Study on microchip controlled inverter GMAW-P welding system. Journal of South China University of Technology. 2003, 31(1):45-47. (in Chinese)
37.Wang ZhiQiang, Cao Biao, Xue Feng. The study on microcomputer constant current control system of the spot welding inverter. Transaction of the China Welding Institution, 1999, 20(12):98-102. (in Chinese)
38.Cao Biao*, Cheng Yanming, Huang Shisheng，Zhang Xiaohui，Wang Zhiqiang. A novel soft-switching welding inverter. Transaction of the China Welding Institution, 1998, 19(2):110-114. (in Chinese)
39.Cao Biao*, Wu Yuehua, Xu Fuping. 8098 single-chip computer controller for resistance spot welding inverter. Transaction of the China Welding Institution, 1997, 18(2):38-41. (in Chinese)
40.Cao Biao, Jiang Yihong, Wang Jianyi. Finite element model for resistance spot welding process. Chinese Journal of Mechanical Engineering, 1995, 31(2):99-104. (in Chinese)
41.Cao Biao*. Computer measurement of dynamic parameters of resistance spot welding. Journal of South China University of Technology. 1995, 23(2):41-46.(in Chinese)
42.Cao Biao, Jiang Yihong, Wang Jianyi. Analysis of thermal expansion deformation in resistance spot welding. Transaction of the China Welding Institution, 1995, 16(2):94-99. (in Chinese)
43.Jiang Yihong, Cao Biao. Displacement of electrode thermal dilatation applied to monitoring spot welding quality of Al alloys. Welding & Joining, 1991, (7):9-14 (in Chinese)
44.Jiang Yihong, Wu Yansheng, Ye Guangyu and Cao Biao. Development of an in-process quality control for resistance spot welding based on thermal expansion measured by optical grating. New Advances in Welding and Allied Process, Proceeding of the international conference, Beijing, China, May, 1991, 147-152.
