Introduction:

Ph.D., Material Molding and Simulation Engineering, Huazhong University of Science and Technology, 1997; M.S., Numercial Control of Machine Tool, Gansu University of Technology, 1993; B.S., Mechanical Design and Manufacturing, Gansu University of Technology, 1990

Phone: +86-20-87114578
  Fax: +86-20-87112503
  E-mail: bliu@scut.edu.cn
  Address: School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou, China 510640

Research Group: Polymer Processing Engineering; The National Engineering Research Center of Novel Equipment for Polymer Processing; The Key Laboratory of Polymer Processing Engineering of Ministry of Education

Research Interests
  Modern technology and theory of die & mold design; CAD/CAE/CAM technology for die & mold; Numerical control of polymer processing equipment; Numerical manufacturing technology; Rapid prototyping and manufacturing technology; Software engineering

Recent and Current Research Projects and Topics
  1. Research on transfer process and structural morphology in polymer processing, sponsored by CNSF, 2005-2009.
  2. The mold design and manufacturing of plastics shell product of an intelligent temperature controller, sponsored by a company, 2008-2009.
  3. The research and development of an intelligent monitor of surface defects for plastics products based on image process, sponsored by Dongguan Janus Group, 2009-2010.
  4. The research and development of an automotive processing machine for the edges of plastics products, sponsored by Dongguan Janus Group, 2009-2010.

Selected Publications
  1. Liu Bin, Feng Yanhong, Qu Jinping. “Research on dynamic injection molding technology for metal powder green part”, China Mechanical Engineering, v17, n19, Oct 10, 2006, p 2057-2062, indexed by EI
  2. Liu Bin, Luo Jiewen, Peng Manhua, Qu Jinping, Gao Wei. “Theoretical analysis of filling process in metal-powder dynamic injection molding”, Journal of South China University of Technology (Natural Science), v37, n3, p38-42, March 2009, indexed by EI
  3. Liu Bin, Luo Jiewen, Du Ligang, Qu Jinping. “Preparation and Property of a Water-Soluble Binder for Dynamic Injection Molding of Metal Powders”, Journal of South China University of Technology (Natural Science), v37, n8, August 2009, indexed by EI
  4. Liu Bin, Xie Yi, Huang Xingxing, Feng Yanhong. “Research on the Micro-Extrusion Characteristic of Mini-Screw in the Screw Extruding Spray Head”, ANTEC 2009, indexed by EI
  5. Liu Bin, Liu Qinghui, Feng Yanhong, Qu Jinping. “Research on Dynamic Injection Molding for Metal Powder Green Part”, ANTEC 2009, indexed by EI
  6. Xiao Yunhai, Liu Bin, Liu Qinghui. “Research into the new process and machine for auto-bending of mine-used tri-ring chains”, Key Engineering Materials, v392-394, p387-392, 2009, indexed by EI
  7. Liu Bin, Xie Yi. “Research on the Micro-Extrusion Characteristic of Mini-Screw in the Screw Extruding Spray Head”, Polymer Bulletin (indexed by EI), (accepted)
  8. Liu Bin, Liu Qinghui, Qu Jinping. “Research on Thermal Oxidative Aging of Dynamic Injection Molded Polypropylene Products”, Polymer materials science & engineering (indexed by EI), (accepted)
  9. Liu Bin, Liu Qinghui. “Research on Hygrothermal Aging of Dynamic Injection Molded Polypropylene Products”, Material Science and Technology (indexed by EI), (accepted)
  10. Chen Kaiyuan, Zhou Nanqiao, Liu Bin, Li Congwei, Tang Hailong. “Structure and mechanical properties of vibrating extruded high density polyethylene tubing”, China Synthetic Resin and Plastics, v25, n6, p50-54, November 2008, indexed by EI
  11. Chen Kaiyuan, Zhou Nanqiao, Liu Bin, Wen Shengping. “Effect of vibration extrusion on the structure and properties of high-density polyethylene pipes”, Polymer International, 2009; 58:117-123 (indexed by SCI)
  12. Chen Kaiyuan, Zhou Nanqiao, Liu Bin. “Improved Mechanical Properties and Structure of Polypropylene Pipe Prepared under Vibration Force Field”, Journal of Applied Polymer Science (indexed by EI), (accepted)
  13. Sun Yanming, Luo Wen, Liu Bin, Ruan Feng, Yin Guofu. “Method of design hydraulic cylinders based on CBR”, Journal of Computer-Aided Design & Computer Graphics, v11, n2, 1999, p176-179, indexed by EI
  14. Feng Yanhong, Qu Jinping, Liu Bin, He Hezhi, Jin Gang, Zou Xinliang. “Numerical simulation of melting process in single-screw extruder under vibration force field”, Journal of South China University of Technology (Natural Science), v34, n9, September, 2006, p104-110, indexed by EI
  15. Wang Quan, Liu Bin, Qu Jinping. “Research on structural performance of green parts for electromagnetic dynamic metal powder injection molding”, Rare Metal Materials and Engineering, v36, n2, February, 2007, p 309-312, indexed by EI
  16. Qu Jinping, Zhou Weihua, Liu Bin, Pan Wenzhe. “Experimental study on the influence of pulsatile injection pressure on filling pressure and filling time”, Polymer-Plastics Technology and Engineering, v46, n7, July, 2007, p709-712, indexed by SCI
  17. Feng Yanhong, Qu Jinping, He Hezhi, Liu Bin, Cao Xianwu, Wen Shengping. “Effect of the Axial Vibration of Screw on Total Shear Strain Distribution of Melt in Single-Screw Extruders”, Journal of Applied Polymer Science, Vol.108, 3917–3926 (2008), Published online 17 March 2008 in Wiley InterScience, indexed by EI
  18. Zhou Weihua, Liu Bin, Wen Shengping, Qu Jinping. “Pressure losses in the packing stage of pulsatiled injection molding”, Material Science and Technology, v16, n4, p485-487, August 2008, indexed by EI