Li Di
time: 2017-04-17

Education

  • Obtained PH. D from Control Theory and Applications, Automation Department, South-China University of Technology, Guangzhou, China, in 1993.

  • Obtained MS degree from Aero-Engine Department, Nanjing Univ. of Aeronautics & Astronautics, Nanjing, China in 1988.

  • Obtained BS from Aero-Engine Department, Nanjing Univ. of Aeronautics & Astronautics, Nanjing, China

Awards

  • Critical enabling control technologies for advanced manufacturing equipment and the applications” ,1st grade award of scientific and technological progress in Guangdong province, 2009

  • Intelligent control for polluted water treatment devices”, 2nd grade award of national scientific and technological progress, 2008

  • Intelligent control for polluted water treatment devices”, 1stgrade award of scientific and technological progress in Guangdong province, 2007

  • Nanyue Excellent Teacher”, the personnel department of Guangdong province, 2007

  • Slide mode control theory and application for nonlinear complex system”, 1st grade award of scientific and technological progress in Guangdong province, 2006

  • New Century Talents , Ministry of Education, 2005

  • Robotic welding quality control “, 2nd grade Science and Technology Progress Award by National Education Commission of China, 1994.

Work experience

  • 2001.12-present, Professor,School of Mechanical and Automotive Engineering ,South China University of Technology, China,

  • 2012.12-2013.6, Senior Researcher, College of Engineering, University of California, Davis, CA, USA

  • 2005.8-2006.2, Senior Researcher, Institute for Software Integrated Systems(ISIS), Vanderbilt University, Nashville, TN, USA

  • 2002. 5-2002.6, Visiting Scholar, School of Electrical and Information, The University of Sydney, Australia.

  • 1999.1 – 2001.12, Associate Professor, School of Mechanical Engineering , South China University of Technology, China

  • 1997.7 – 1998.9, Research Fellow, Center for High Performance and Embedded System (CHiPES), Nanyang Technological University, Singapore

  • 1996.12-1997.7, Associate Professor, Department of Electrical Engineering, GuangdongUniversity of Technology, China

  • 1996.3-1996.12 , Foreign Researcher, Joining and Welding Research Institute(JWRI), Osaka Univeristy,Osaka, Japan,

  • 1993.7 – 1996.12 , Lecturer/Associate Professor,Guangdong University of Technology, China

  • 1988.7 –1990.8, Engineer, Beihai Shipyard, Qingdao, China

Selected Projects in progress

  • TheNationalKeyTechnologyR&DProgramDevelopment and application of Programmable automated controller for PCB equipment( 2015.1-2017.12

  • National Nature Science Foundation of China, Formal Modeling and Verification technology for CNC based on Service(2016.1-2019.12

  • Nature Science Foundation of Guangdong Province, Intelligent industrial robot and manufacturing system key theory based on CPS( 2015.08-2019.08

  • ScienceandTechnologyPlanningProjectofGuangdongProvinceKey technology and equipment for Home appliance manufacturing automation2014.6-2016.6

  • ScienceandTechnologyPlanningProjectofGuangdongProvinceResearch on smart industrial camera for advanced manufacturing domain2015.04-2017.03

Selected Publications

1.D. Li, J. Ouyang*, H. Li, J. Wan. State of charge estimation for LiMn2O4 power battery based on strong tracking sigma point Kalman fileter.Journal of Power Sources, 2015, 279: 439-449.

2.S. Li, D. Li,F. Li*, N. Zhou. CPSiCGF: A code generation framework for CPS integration modeling.Microprocessors and Microsystems. DOI: 10.1016/j.micpro.2015.05.010, 2015.

3.S. Wang, J. Wan*,D. Li and C. Zhang. Implementing Smart Factory of Industrie 4.0: An Outlook.International Journal of Distributed Sensor Networks.vol. 2015, Article ID 681806, 10 pages, 2015.

4.Z. Li, Y. Hu, D. Li. Robust design of feedback feed-forward iterative learning control based on 2D systm theory for linear uncertain systems.International Journal of Systems Science,DOI: 10.1080/00207721.2015.1005724, 2015

5.G. Du, P. Zhang, D. Li. Online Robot Calibration Based on Hybrid Sensors Using Kalman Filters.Robotics and Computer Integrated Manufacturing, 2015, 31: 91-100.

6.D. Li, L. Liang*, W. Zhang. Defect inspection and extraction of the mobile phone cover glass based on the principal components analysis,The International Journal of Advanced Manufacturing Technology, 73(9-12): 1605-1614, 2014.

7.G. Du, P. Zhang, D. Li. Human-Manipulator Interface based on Multisensory Process via Kalman Filters.IEEE Transactions on Industrial Electronics, 61(10): 5411-5418, 2014.

8.P. Zhang, G. Du, D. Li. A Novel Human-Robot Interface Using Hybrid Sensors With Kalman Filters.Industrial Robot: An International Journal, 41(6): 585-595, 2014.

9.Li Di, Ye Jinhua. Adaptive robust control of wheeled mobile robot with uncertainties.International Workshop on Advanced Motion Control, AMC, 2014:518-523

10.J. Wan*, H. Yan, D. Li, K. Zhou and L. Zeng. Cyber-physical systems for optimal energy management scheme of autonomous electric vehicle.The Computer Journal, 56(8): 947-956, 2013.

 


Cell: +86-13178838821

Email itdili@scut.edu.cn