Liu, Jiang
time： 2015-07-30

Name:

Jiang Liu

Introduction:

Prof. Jiang Liu
E-mail: jiangliu@scut.edu.cn, jliu365@yahoo.com
Tel: +86-020-22236168

EDUCATION
1994-1997, Ph. D. of Science, Solid State Physics, Department of Physics,
Jilin University, China.Thesis: “Solid Oxide Fuel Cells”.
1985-1988, Master of Science, Solid State Physics, Department of Physics,
Jilin University, China.Thesis: “Selected Properties of La1-xSrxCoO3 and Its Application in Sealed-Off CO2 Lasers”.
1981-1985, Bachelor of Science, Department of Physics,  Jilin University, China.

PROFESSIONAL EXPERIENCE
May 2004-present, School of Chemistry and Chemical Engineering, South China University of Technology, Professor
Jan., 2000- May 2004,   Department of Physics, Jilin University, China, Professor
Aug., 2000-June, 2003, Department of Materials Science and Engineering, Northwestern University, USA, Research Associate
Apr., 2000- Aug., 2000,  Department of Materials Science and Engineering, Georgia Institute of Technology, USA, Visiting Scholar
Sep., 1996- Dec., 1999, Department of Physics, Jilin University, China, Associate Professor
Sep., 1998- Dec., 1998, Department of Applied Chemistry, Osaka Prefecture University, Japan, Joint Researcher
Sep., 1990- Sep., 1996, Department of Physics, Jilin University, China, Lecturer  
July, 1988- Sep., 1990, Department of Physics, Jilin University, China, Assistant Professor

RESEARCH INTEREST
Solid oxide fuel cells, characteristics and processing techniques of ceramic materials, solid state ionics, solid state electrochemistry, etc.

AWARDS
1. Natural Science Achievement Award by The National Education Department, 1993
2. Natural Science Achievement Award by The National Education Department, 2003

MAIN PUBLICATIONS

1.Yaohui Zhang, Jiang Liu, Juan Yin, Fabrication of anode-supported tubular solid oxide fuel cells by slip casting in combination with dip coating technique, Journal of Fuel Cell Science and Technology 7 (2010) 011014-1.
2. Yaohui Bai, Jiang Liu, Chuanling Wang, Performance of cone-shaped tubular anode-supported segmented-in-series solid oxide fuel cell stack fabricated by dip coating technique, International Journal of Hydrogen Energy, 3-4 (2009) 7311-15.  
3. Yubao Tang, Jiang Liu, Jing Sui, A novel direct carbon solid oxide fuel cell, ECS Transactions, 25 (2) (2009) 1109-1114.
4. Changlin Tang, Liping Li, Hongbo Gao, Guangshe Li, Xiaoqing Qiu, Jiang Liu, Syntheses and catalytic performances of Ag–Ni bi-metals, Journal of Power Sources 188 (2009) 397–403
5. Jiao Ding, Jiang Liu, A novel design and performance of cone-shaped tubular anode-supported segmented-in-series solid oxide fuel cell stack, Journal of Power Sources 193 (2009) 769–773
6. Chao Jin, Jiang Liu∗, Lianhe Li, Yaohui Bai, Electrochemical properties analysis of tubular NiO–YSZ anode-supported SOFCs fabricated by the phase-inversion method, Journal of Membrane Science 341 (2009) 233–237.
7. Weimin Guo, Jiang Liu, Chao Jin, Hongbo Gao, Yaohui Zhang, Electrochemical evaluation of La0.6Sr0.4Co0.8Fe0.2O3-d–La0.9Sr0.1Ga0.8Mg0.2O3-d composite cathodes for La0.9Sr0.1Ga0.8Mg0.2O3-d electrolyte SOFCs, Journal of Alloys and Compounds 473 (2009) 43–47
8. Chao Jin, Jiang Liu, Preparation of Ba1.2Sr0.8CoO4+ı K2NiF4-type structure oxide and cathodic behavioral of Ba1.2Sr0.8CoO4+ı–GDC composite cathode for intermediate temperature solid oxide fuel cells, Journal of Alloys and Compounds 474 (2009) 573–577
9. Jiao Ding, Jiang Liu∗,Weimin Guo, Fabrication and study on Ni1−xFexO-YSZ anodes for intermediate temperature anode-supported solid oxide fuel cells, Journal of Alloys and Compounds 480 (2009) 286–290.
10. Yaohui Bai, Jiang Liu∗, Hongbo Gao, Chao Jin, Dip coating technique in fabrication of cone-shaped anode-supported solid oxide fuel cells, Journal of Alloys and Compounds 480 (2009) 554–557.
11. Jiao Ding, Jiang Liu, Weimin Guo, Research on the performance of Sm0.2Ce0.8O1.9 (SDC) prepared by different methods, Journal of Inorganic Materials 24 (1) (2009) 152-156..
12. Chao Jin, Jiang Liu*, Yaohui Zhang, Jing Sui,Weimin Guo, Characterization and electrochemical performances of Ba2-xSrxFeO4+ı as a novel cathode material for intermediate-temperature solid oxide fuel cells, Journal of Power Sources 182 (2008) 482-488.
13. Chao Jin, Jiang Liu*,Weimin Guo, Yaohui Zhang, Electrochemical characteristics of an La0.6Sr0.4Co0.2Fe0.8O3–La0.8Sr0.2MnO3 multi-layer composite cathode for intermediate-temperature solid oxide fuel cells, Journal of Power Sources 183 (2008) 506–511.
14. Jing Sui, Jiang Liu*, Slip-Cast Ce0.8Sm0.2O1.9 Cone-Shaped SOFC, Journal of the American Ceramic Society, 2008, 91(4): 1335-1337.
15. Jiao Ding, Jiang Liu*, Wensheng Yuan, Yaohui Zhang, Slip casting combined with colloidal spray coating in fabrication of tubular anode-supported solid oxide fuel cells, Journal of the European Ceramic Society 28 (2008) 3113– 3117.
16. Jiao Ding and Jiang Liu*, Fabrication and Electrochemical Performance of Anode-Supported Solid Oxide Fuel Cells by a Single-Step Cosintering Process, J. Am. Ceram. Soc., 91 [10] 3303–3307 (2008) .
17. Yaohui Zhang, Jiang Liu*, Xiqiang Huang, Zhe Lu, Wenhui Su, Performance evaluation of thin membranes solid oxide fuel cell prepared by pressure-assisted slurry-casting, International Journal of Hydrogen Energy, 33(2), 2008, 775-780.
18. Guo Weimin, Liu Jiang*, Zhang Yaohui, Electrical and stability performance of anode-supported solid oxide fuel cells with strontium- and magnesium-doped lanthanum gallate thin electrolyte. Electrochimica Acta 53 (2008)4420-4427.
19. Yaohui Zhang, Jiang Liu*, Xiqiang Huang, Zhe Lu, Wenhui Su, Low temperature solid oxide fuel cell with Ba0.5Sr0.5Co0.8Fe0.2O3 cathode prepared by screen printing, Solid State Ionics 179 (2008) 250–255.
20. Jiao Ding, Jiang Liu*, An anode-supported solid oxide fuel cell with spray-coated yttria-stabilized zirconia (YSZ) electrolyte film, Solid State Ionics 179 (2008) 1246-1249.
21.  Hongbo Gao, Jiang Liu*, Hongyu Chen, Shi Li, Tianmin He, Yuan Ji, Jidong Zhang, The effect of Fe doping on the properties of SOFC electrolyte YSZ, Solid State Ionics 179 (2008) 1620-1624.
22. Weimin Guo, Jiang Liu*, The effect of nickel oxide microstructure on the performance of Ni–YSZ anode-supported SOFCs, Solid State Ionics 179 (2008) 1516-1520.
23. Yaohui Zhang, Jiang Liu*, Juan Yin, Wensheng Yuan and Jing Sui. Fabrication and performance of cone-shaped segmented-in-series solid oxide fuel cells. International Journal of Applied Ceramic Technology. 5 (6) (2008) 568-573.
24. Jing Sui, Jiang Liu, An electrolyte-supported SOFC stack fabricated by slip casting technique, ECS Transactions, 7(1) 633-637 (2007)
25. E.P. Murray, S.J. Harris, J Liu, et al., Direct solid oxide fuel cell operation using isooctane, Electrochemical and Solid State Letters 9 (6): A292-A294 2006
26. Tianmin He, Qiang He, Li Pei, Yuan Ji, Jiang Liu, Doped Lanthanum Gallate Film Solid Oxide Fuel Cells Fabricated On a Ni/YSZ Anode Support, Journal of the American Ceramic Society, 89(8): 2664-2667 (2006)
27. Jiang Liu, Direct hydrocarbon solid oxide fuel cells, Progress in Chemistry 18 (7-8)（2006）1026-1033
28. Yuanbo Lin, Zhongliang Zhan, Jiang Liu, Scott A.Barnett, “Direct operation of solid oxide fuel cells with methane fuel”, Solid State Ionics 176(23-24)(2005)1827-1835
29. E.P.Murray, S.J.Harris, J.Liu, S.A.Barnett, “Direct solid oxide fuel cell operation using a dimethyl ether/air fuel mixture”, Electrochemical and Solid-State Letters, 8(10)(2005)A531-A533
30. Jidong Zhang, Yuan Ji, Hongbo Gao, Tianmin He, Jiang Liu, “Composite cathode La0.6Sr0.4Co0.2Fe0.8O3–Sm0.1Ce0.9O1.95–Ag for intermediate-temperature solid oxide fuel cells”, Journal of Alloys and Compounds 395 (2005) 322–325
31. Tianmin He, Pengfei Guan, Ligong Cong, Yuan Ji, H.Sun, Jinxia Wang, Jiang Liu, “Assessment of performances of Ni-Cu-LSGM as anode materials for intermediate-temperature LaGaO3-based solid oxide fuel cells”, Journal of Alloys and Compounds 393 (1-2) (2005) 292-298
32. Yuan Ji, Jiang Liu, Tianmin He, Jinxia Wang, Wenhui Su, “The effect of Pr co-dopant on the performance of solid oxide fuel cells with Sm-doped ceria electrolyte”, Journal of Alloys and Compounds, 389(1-2) (2005)317-322.
33. Tianmin He, Yinglong Huang, Qiang He, Yuan Ji, Li Pei, Jiang Liu, Zhe Lu, “The effects on the structures and properties in the oxide-ion conductor La2Mo2O9 by paitial substituting Ba for La”, Journal of Alloys and Compounds, 388(1) (2005) 145-152.
34. T.S.Lai, J.Liu, and S.A.Barnett, “Effect of Cell Width on Segmented-in-Series SOFCs”, Electrochemical and Solid-State Letters, 7(4), (2004)A78-A81.
35. Z. Zhan, J.Liu, S.A.Barnett, “Operation of anode-supported solid oxide fuel cells on propane-air fuel mixtures”, Applied Catalysis A: General, 262 (2004) 255-259.
36. J. Liu, S.A.Barnett, “Operation of anode-supported solid oxide fuel cells on methane and natural gas”, Solid State Ionics, 158(1-2) (2003)11-14.
37. Y. Ji, J.Liu, T. He, et.al., “Single intermedium-temperature SOFC prepared by glycine-nitrate process”, J. Alloy. Compd. 353(1-2)(2003)257-262.
38. T. He, Z.Lu, J.Liu, “Electrical properties and applications of (ZrO2)0.92(Y2O3)0.08 electrolyte thin wall tubes prepared by improved slip casting method”, J. Rare Eareth, 21(1)(2003)31-36.
39. J.Liu, S.A.Barnett, “Thin yttrium-stabilized zirconia electrolyte solid oxide fuel cells by centrifugal casting”, J. Am. Ceram. Soc., 85(12) (2002) 3096-3098.
40. J.Liu, B.D.Madsen, Z.Q.Ji, S.A.Barnett, “A fuel-flexible ceramic-based anode for solid oxide fuel cells”, Electrochem. Solid State Letters, 5(6) (2002) A122-A124.
41. Y. Ji, J.Liu, T. He, et.al., “Electrolyte and electrode materials of intermedium-temperature SOFC by glycine-nitrate process”, Chem. J. Chinese U., 23(7) (2002) 1227-1230.
42. T.He, Z.Lu, H.Liu, J.Yang, L.Pei, W.Liu, X.Huang, Z.Liu, J.Liu, W.Su, “Preparation of YSZ electrolyte membrane tube by vacuum casting and its application to solid oxide fuel cells”, Chem. J. Chinese U., 23(5) (2002) 932-936.
43. T.He, Z.Lu, Y.Huang, P.Guan, J.Liu, W.Su, “Characterization of YSZ electrolyte membrane tubes prepared by a vacuum casting method”, J. Alloy Compd., 337 (2002) 231-236.
44. Z.Lu, X.Huang, W.Liu, T.He, Z.Liu, J.Liu, W.Su, “Properties and application of double alkali earth doped Ce0.9Ca0.1-xSrxO1.90”, J. Rare Earth, 20 (1) (2002) 47-50.
45. Z. Lu, J.Liu, X.Huang, et.al., Studies on a fuel cell with solid electrolyte of SrCe0.9Gd0.1O3, Chem. J. Chinese U 22 (4) (2001)630-633.
46. X. Huang, Z. Lu, W. Liu, Z.Liu, L.Pei, T.He, J.Liu, W.Su, “A method for increasing the three-phase reaction boundaries in anode of SOFC”, Chem. J. Chinese U. 21(6) (2000) 947-948.
47. X.Huang, J.Liu, Z.Lu, et.al., Properties of nonstoichiometric Pr0.6-xSr0.4MnO3 as the cathodes of SOFCs, Solid State Ionics, 130 (3-4) (2000) 195-201.
48. X.Liu, W.Su, Z.Lu, J.Liu, L.Pei, W.Liu, L.He, “Mixed valence state and electrical conductivity of La1-xSrxCrO3”, J. Alloy Compd., 305 (1-2) (2000) 21-23.
49. Y.Ji, J.Liu, Z.Lu, et.al., “Study on the properties of Al2O3-doped (ZrO2)0.92(Y2O3)0.08 electrolyte”, Solid State Ionics, 126 (3-4) (1999) 277-283.
50. X. Liu, Z.Lu, J.Liu, et.al., “Study on rare earth interconnector of La1-xCaxCrO3”, J. Rare Eearth, 17 (3) (1999) 239-240.
51. X.Liu, M.Yang, Z.Lu, L.Pei, J.Liu, W.Su, “A study on synthesis of La1-xCaxCrO3 by sol-gel and their electrical properties”, Acta. Phys. Sin-Ov. Ed. 8 (9) (1999) 690-693.
52. J.Liu, W.Liu, Z.Lu, et.al., “Study on the properties of YSZ electrolyte made by plaster casting method and the applications in solid oxide fuel cells”, Solid State Ionics, 118 (1-2) (1999) 67-72.
53. J. Liu, Z. Lu, W. Liu, et.al, Research of Processing Techniques Used in Fabrication of Solid Oxide Fuel Cells and Study of Their Selected Properties, Science in China(Series A), 41(5), 521-526(1998).
54. Y.Zheng, T.Lu, J.Liu, et.al., “The effect of electron effective mass mismatch on the electron-optical-phonon scattering rate in a quantum well structure”, Semicond. Sci. Tech., 12 (10) (1997) 1235-1239.
55. J.Liu, L.He, G.Chen, “Study on selected properties of La1-xSrxCoO3 and its application in sealed CO2 lasers”, J. Mater. Science, 32, (1997)203-206.